![](/uploads/1/2/5/5/125564577/256190080.jpg)
Similar Messages:
Firmware Upgrade Firmware Version: v1.03.6 Administration Wireless-N Broadband Router WRT300N Setup Wireless Security Access Restrictions Applications.
ADVERTISEMENTLinksys Wireless Router :: Latest Firmware For WRT300N V1.0?
Apr 25, 2012I have WRT300N V1.0 with Firmware v1.03.6.what is latest Firmware for WRT300N V1.0 and where I can get it.I tried at Downloads under Support in Cisco website but it said 'No firmware/driver download available'.
Linksys Wireless Router :: Finding 1.0 Or 1.1 Firmware For Wrt300n?
May 16, 2012i looked everwhere for the firmware. cant find it anywhere. looking for 1.0 or 1.1 firmware for wrt300n.
Linksys Wireless Router :: Can't Upgrade WRT300N V2.0 With Old Firmware
Jun 16, 2011PS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?
Linksys Wireless Router :: WRT300N No Web Access
Sep 16, 2011After enduring some protracted problems with wireless connectivity, I decided to bite the bullet and upgrade my Linksys WRT300N from firmware version 2.00.08 to 2.00.21.I found the links to advice on how to achieve this, via a two-stage upgrade url...I followed the following steps: Upgrade firmware using file 'wrt300n.bin' file, as per the above link. This brought the firmware version to 2.00.17. Upgrade went smoothly - config page refreshed after rebooting the router and all was well.Upgrade firmware using file 'WRT300N-EU-ETSI-ML-2.00.21-code.img' file, downloaded from the Linksys support site. Again, the upgrade went smoothly (apparently) ... except that after rebooting the router, my config page failed to refresh.I have since powered the router off (wait 30 seconds) and on again. Still no web access.
The device, however, does seem to be working OK. I have wireless access, and wireless access, via computers on my network. The only thing I cannot do is access the web config page - but that's not quite satisfactory. I have a number of customised settings on the device, saved to a config file. Included among those is a changed IP address for the router of 192.168.1.10. I am tempted to do a hard reset to factory defaults, connect via a dedicated cable connection and then reapply my custom settings (either manually, or from the config file.) However at this stage I have no confidence that the device will have web access after reset - and then it won't be working for me at all!
Does firmware version 2.00.21 require http access via a specific port (i.e. not 80)? Is there some other way I can access the device for modifying configuration, other than by the web utility? (I have posted another question about obtaining a copy of my long-ago-misplaced Setup CD-ROM.
The device, however, does seem to be working OK. I have wireless access, and wireless access, via computers on my network. The only thing I cannot do is access the web config page - but that's not quite satisfactory. I have a number of customised settings on the device, saved to a config file. Included among those is a changed IP address for the router of 192.168.1.10. I am tempted to do a hard reset to factory defaults, connect via a dedicated cable connection and then reapply my custom settings (either manually, or from the config file.) However at this stage I have no confidence that the device will have web access after reset - and then it won't be working for me at all!
Does firmware version 2.00.21 require http access via a specific port (i.e. not 80)? Is there some other way I can access the device for modifying configuration, other than by the web utility? (I have posted another question about obtaining a copy of my long-ago-misplaced Setup CD-ROM.
Linksys Wireless Router :: WRT300N Will Not Reboot?
Aug 20, 2012I unplugged my router and when I plugged it back in, it stopped working. The 4 port lights and the ethernet light come on immediately when I plug it in instead of the normal boot sequence.
I tried resetting it, leaving it unplugged for long periods, using the power supply from my other router,... nothing works.
I tried resetting it, leaving it unplugged for long periods, using the power supply from my other router,... nothing works.
Linksys Wireless Router :: WRT300N For Connecting PS3 Through Wi-Fi
Aug 8, 2007Just got WRT300N for connecting my ps3 thru wi-fi. I got everything works but the signal that I got from my PS3 is around 50% only. I am using latest Linksys firmware. My ps3 is located around 25 feet away one floor down from my wireless router. But there is no major wall inbeween the connection. My WRT300N should be a cutting edge product for networking. How come I still got 50% signal strength? Besides moving the router or pS3 closed to each other.
Linksys Wireless Router :: Wrt300n Linked To Wrt150n?
Aug 6, 2011In my home I have a cable modem wired to a links wireless router a wrt 300n in my office (only hardwired used in there) and I do not get such good distance to my back bedrooms with my laptop. I have run a Ethernet cable dead center of the house for my sat receiver that is connected and wired to the 300wrt. Here is my question can I use the 150 like a hub or switch at the office connected to the cable modem and use the wrt300n router so that I get wireless on that side of the house. Or in reading here I see I can maybe use a bridge. I do have a older Linksys wrt150n sitting in a box.I have read until my eyes are almost bleeding and am not sure. How I can get a better signal on the other side of the house.
Linksys Wireless Router :: WRT300N - No Internet Connection Via Laptop
Apr 2, 2010Unable to connect to internet via laptop + desktop to wireless Linksys router. Model=WRT300N.
Connection worked fine on my laptop before, however, stopped working approx 3 days ago.In attempt to resolve connection issue, I de-install linksys software from my desktop, now I cannot execute setup due to the fact that I cannot connect to the internet.
Connection worked fine on my laptop before, however, stopped working approx 3 days ago.In attempt to resolve connection issue, I de-install linksys software from my desktop, now I cannot execute setup due to the fact that I cannot connect to the internet.
Linksys Wireless Router :: Way To Access Set Up Page For Secondary WRT300N
Aug 13, 2012Since the secondary router WRT300N uses the same default IP 192.168.1.1 as the primary installed router EA4500, any attempt to log onto the set up page results in diversion to the Cisco Connect Cloud for the primary router.
Is there a way to access the set up page for the secondary WRT300N, bypassing the main router intervention via the Cloud software?
Is there a way to access the set up page for the secondary WRT300N, bypassing the main router intervention via the Cloud software?
Linksys Wireless Router :: WRT300N Dropped Connection Completely
Jul 4, 2011I've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect. My main pc is hard wired directly to the router and works perfectly as always. 3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed. The firmware was upgraded a long time ago and there are no other upgrades available.
Linksys Wireless Router :: Unable To Connect To WRT300N Using Web Interface
Sep 16, 2011![Linksys wrt300n v1 firmware upgrade Linksys wrt300n v1 firmware upgrade](http://4.bp.blogspot.com/-JbiMS0_NLvA/VA5F6RGmAbI/AAAAAAAASnU/gSzLnkVwrD0/s1600/2.1.jpg)
For reasons I will explain in a separate thread, following a firmware upgrade to version 2.00.21, I am no longer able to connect to my WRT300N using the web interface. The device seems to be working fine (but for the lack of the web config access.) I'm loathe to leave it 'inaccessible' and would like to use the Setup CD-ROM described in the manuals to connect directly to the device to see if I can fix the problem.
I have been through my 'filing system' (read 'junk room') to try to find the original device packaging, wherein I am sure I would find the original CD-ROM. Is there anywhere I can download an image of the original Linksys Setup CD-ROM for the WRT300N version 2.0 device?
I have been through my 'filing system' (read 'junk room') to try to find the original device packaging, wherein I am sure I would find the original CD-ROM. Is there anywhere I can download an image of the original Linksys Setup CD-ROM for the WRT300N version 2.0 device?
Linksys Wireless Router :: WRT300N Losing Over 50mbps Of Speed?
Jan 22, 2013So lately my internet has been painstakingly slow, Youtube videos dont load, Web Pages take FOREVER, its killing me. So I ran some speed tests This is wireless over my router. (WRT300N (Yes i know its old))
And this is direct connetion from my modem this really just makes me want to never use the internet again.
And this is direct connetion from my modem this really just makes me want to never use the internet again.
Linksys Wireless Router :: WRT300N Way To Reinstall Connection And Put Password
Jan 2, 2013Due to problems with my wifi connection, I had to reset my router and modem. I have to reinstall my settings now, and therefore I need to write down a security number. That should be written on the back of my router (model WRT300N), a barcode with 8 numbers. I can't find that code. Where can I find it or is there another way to reinstall my connection and put a password on it? It's open access now.
Linksys Wireless Router :: WRT300N - Air Ave Access Point For Sprint
Mar 8, 2012I have a WRT300N wireless router that was working fine until I tried hooking up an Air ave Access Point for Sprint. Now the router doesn't work at all - even the hard wired connections don't work. I tried the usual - unplugging, plugging back in, disconnecting, reconnecting, hitting the reset button - nada.
Removing the Air ave Access Point doesn't matter - it still doesn't work when I put it back the way I had it before. The only way I can get a signal to my computer is to plug it directly into the modem, bypassing the router.
Removing the Air ave Access Point doesn't matter - it still doesn't work when I put it back the way I had it before. The only way I can get a signal to my computer is to plug it directly into the modem, bypassing the router.
Linksys Wireless Router :: WRT300N - Can't Play Online On Xbox Live
Jan 15, 2012Why I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
Linksys Wireless Router :: Cannot Connect Canon MP620 Printer To WRT300N V 1.1
Oct 10, 2009I cannot seem to figure out how to connect my Canon MP620 Wireless printer to my wireless router. The router is a WRT300N v 1.1 with the latest firmware upgrade. I am using WPA for security. I can connect to the printer wirelessly through my neighbor's open system so it has something to do with security I suspect. I have enabled the AP feature and disabled it to see if that is an issue. That has not changed anything. I have looked at other posts with HP printer issues and access point posts but none of those solutions have worked. The Canon gives me an option to use the WPA, WPA2 and WEP?
Linksys Access Point :: Can WRT300N Wireless Router Be Used As LWAPP Device
Nov 28, 2011Can a Linksys WRT300N wireless router be used as an LWAPP AP device?
Linksys Wireless Router :: WRT300N - Slow Speed And Low Ping Test?
Aug 18, 2007I have installed a WRT300N on to a new machine and the connection speed reads as 1 Mbps (not 100 but 1 ). I did a ping test and the results are
Linksys Wireless Router :: WRT300N Not Providing Internet When DHCP Disabled
Apr 5, 2012Here is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
Linksys Wireless Router :: WRT300n Version 1.1 - Power Light Blinking
Aug 15, 2011If I conact from the modem to the pc I have internet so it must be the router. The power light is blinking along with all the port lights. Power light is blinking one time slow 2 fast. Have tried holding the reset button for 30 seconds and unpluging for 30 seconds. Can not go to the ip address it times out. New firmware is not avalible.
Linksys Wireless Router :: Connecting WRT300N To Uverse Gateway - Dynamic IP Address?
Feb 6, 2012I have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
Linksys Wireless Router :: WRT300N Power Light Dim And All Other Ports Solid Green
Nov 20, 2011I have a WRT300N and the power light is dim and all 4 ports are solid green along with the internet light being solid green.. Nothing else is plugged in.. Just the power.. I have tried to hard reset and nothing happens.
Linksys Wireless Router :: WRT300N - Reconnecting To Modem While Retaining All Current Security And Settings
Feb 24, 2012Comcast service went down in our neighborhood and when it came back up my internet was down and all five LED lights on my Linksys router are solid green. Tech support tells me that I have to reset the unit to get it to function again.It's been a very long time since I set up the home network and while I'm pretty sure I can make my way through setting up from scratch (I'm assuming resetting goes back to factory settings) I was hoping there was a way to reconnect the router to the modem while retaining all the current security and settings.
Linksys Wireless Router :: Reset WRT300N To Default Settings To Setup Internet Connection
Mar 29, 2012I've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
Linksys Wireless Router :: WRT300N Wireless Routers Are Compatible With LWAPP Configuration?
Nov 28, 2011Whether the Linksys WRT300N wireless routers are compatible with LWAPP configuration?My school lab setup uses Cisco integrated services routers with NM-AIR-WLC6-K9 network modules as controllers in the LWAP network. The controller accepts configuration without error but does not pick up or seem to see the WRT300 AP routers, so cannot push out basic LWAP config info
Cisco Switching/Routing :: Ws-C3550-24-Emi Memory Upgradable?
Nov 3, 2011i have a Ws-C3550-24-Emi switch and i need to upgrade its flash memory to 32Mb. I couldn't find any documents in cisco website about the memory upgrade guideline. Possible to upgrade this switch to 32Mb? If so, what's the max of memory i can upgrade? and the part number for this type of memory?
How To Turn Off NAT On A Linksys WRT300N
Feb 7, 2011I have a WRT300N Linksys Router and I have not been very happy with it's performance. I know it's old now, but the final straw was when I started to need UPNP and the router keeps turning it off. I can only get it to work for an hour or so at a time by rebooting the router. Then after some time my device tells me UPNP is not working again. I saw some articles about this and tried several fixes, and I am beyond caring whether it works with UPNP anymore. I bought a NetGear N600 to replace it and so far it is working great. I had a linksys WRT54G years ago and it was a workhorse, never had any issues and it is still working today at a friend's house. I have had several Linksys routers since and have had nothing but bad luck. So I am giving Netgear a try.
Anyway... Now I have the Netgear router working I want to use the linksys to extend my wireless network. I ran a cable to the other side of my house where the wireless signal was not so good and plugged the cable into a LAN port on the WRT300N router. I then disabled the the firewall settings and DHCP, etc. I turned off UPNP (Not that I needed to, but I figured it would start working since I don't need it now and cause issues) I also turned off NAT. But I have an app that is telling me that I have 2 devices doing NAT on my network and the app doesn't like it.
how I can for SURE turn off NAT on the WRT300N router? I am getting ready to just go get another Netgear device and take the Linksys one out Office Space style.
Anyway... Now I have the Netgear router working I want to use the linksys to extend my wireless network. I ran a cable to the other side of my house where the wireless signal was not so good and plugged the cable into a LAN port on the WRT300N router. I then disabled the the firewall settings and DHCP, etc. I turned off UPNP (Not that I needed to, but I figured it would start working since I don't need it now and cause issues) I also turned off NAT. But I have an app that is telling me that I have 2 devices doing NAT on my network and the app doesn't like it.
how I can for SURE turn off NAT on the WRT300N router? I am getting ready to just go get another Netgear device and take the Linksys one out Office Space style.
Linksys WRT300N Just Stopped Working?
Jun 30, 2011My router has been working for close to 4 years now with minor problems, just stopped yesterday, All my PCs lost wifi access and then when I looked at my Linksys WRT300N only the 4 Ethernet port lights were on. Unplugged plugged it again, I connected one of the PCs to the one of the Ethernet port, the PC is reporting that there is nothing connected to the other side. It's been 4 years already, I do have a Linksys wireless G router even older than this which is till working. I guess its spoiled, I don't mind replacing it
Connecting Android Devices To Wifi With Linksys Wrt300n?
Aug 25, 2012My wifi router is linksys WRT300N v1.1 At first my wifi works great with this devices . iphone 4s , ipod touch 4 , hp pavilion dv6 , dell inspirion 1545 . But it don't works with android devices I had a bunch of them samsung galaxy s3 , galaxy nexus , amazon kindle and more ...The android devices connect to wifi but wifi doesn't work for them in browsers I can't open pages there's appears <webpage not available> , but I can use skype on android devices.
Linksys WRT300N - Desktop Won't Connect To Network / Refuses To Authenticate
May 21, 2012I just replaced my router (Linksys WRT300N) that decided to take a dirt nap. I hooked up my son's Netgear router that he used to use for gaming, and got every wireless device in the house going pretty quickly - every one, that is, except my desktop PC (Windows XP Pro SP2). It detects my home network, but when I enter the network key (passphrase), it chugs along for a minute or so and quits, refusing to authenticate, acquire the IP, and finish connecting. That wasn't a problem before with my previous router. The desktop has a D-Link AirPlus G DWL-G510 PCI Adapter card. What's the likelihood that my card went bad at the same time as my router? The card is 5-6 years old I think.
Linksys Wireless Router :: What Is The Best Firmware For BEFW11S4
Apr 10, 2013I want to know what is the best firmware for BEFW11S4.
Linksys Wireless Router :: Where To Get New Firmware For E4200
Apr 14, 2012There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?
Similar Messages:
Linksys Wireless Router :: Latest Firmware For WRT300N V1.0?
Apr 25, 2012I have WRT300N V1.0 with Firmware v1.03.6.what is latest Firmware for WRT300N V1.0 and where I can get it.I tried at Downloads under Support in Cisco website but it said 'No firmware/driver download available'.
Linksys Wireless Router :: Finding 1.0 Or 1.1 Firmware For Wrt300n?
May 16, 2012i looked everwhere for the firmware. cant find it anywhere. looking for 1.0 or 1.1 firmware for wrt300n.
Linksys Wireless Router :: Can't Upgrade WRT300N V2.0 With Old Firmware
Jun 16, 2011PS Linksis Online Support said they do not have old firmware andgives me some phones to call .. Others have written about the same problem, saying that prior toupgrade with new firmware to be flash with 2.0.14.I need firmware - version: 2.0.14, where to find it?
Linksys Wireless Router :: WRT300N No Web Access
Sep 16, 2011After enduring some protracted problems with wireless connectivity, I decided to bite the bullet and upgrade my Linksys WRT300N from firmware version 2.00.08 to 2.00.21.I found the links to advice on how to achieve this, via a two-stage upgrade url...I followed the following steps: Upgrade firmware using file 'wrt300n.bin' file, as per the above link. This brought the firmware version to 2.00.17. Upgrade went smoothly - config page refreshed after rebooting the router and all was well.Upgrade firmware using file 'WRT300N-EU-ETSI-ML-2.00.21-code.img' file, downloaded from the Linksys support site. Again, the upgrade went smoothly (apparently) ... except that after rebooting the router, my config page failed to refresh.I have since powered the router off (wait 30 seconds) and on again. Still no web access.
The device, however, does seem to be working OK. I have wireless access, and wireless access, via computers on my network. The only thing I cannot do is access the web config page - but that's not quite satisfactory. I have a number of customised settings on the device, saved to a config file. Included among those is a changed IP address for the router of 192.168.1.10. I am tempted to do a hard reset to factory defaults, connect via a dedicated cable connection and then reapply my custom settings (either manually, or from the config file.) However at this stage I have no confidence that the device will have web access after reset - and then it won't be working for me at all!
Does firmware version 2.00.21 require http access via a specific port (i.e. not 80)? Is there some other way I can access the device for modifying configuration, other than by the web utility? (I have posted another question about obtaining a copy of my long-ago-misplaced Setup CD-ROM.
The device, however, does seem to be working OK. I have wireless access, and wireless access, via computers on my network. The only thing I cannot do is access the web config page - but that's not quite satisfactory. I have a number of customised settings on the device, saved to a config file. Included among those is a changed IP address for the router of 192.168.1.10. I am tempted to do a hard reset to factory defaults, connect via a dedicated cable connection and then reapply my custom settings (either manually, or from the config file.) However at this stage I have no confidence that the device will have web access after reset - and then it won't be working for me at all!
Does firmware version 2.00.21 require http access via a specific port (i.e. not 80)? Is there some other way I can access the device for modifying configuration, other than by the web utility? (I have posted another question about obtaining a copy of my long-ago-misplaced Setup CD-ROM.
Linksys Wireless Router :: WRT300N Will Not Reboot?
Aug 20, 2012I unplugged my router and when I plugged it back in, it stopped working. The 4 port lights and the ethernet light come on immediately when I plug it in instead of the normal boot sequence.
I tried resetting it, leaving it unplugged for long periods, using the power supply from my other router,... nothing works.
I tried resetting it, leaving it unplugged for long periods, using the power supply from my other router,... nothing works.
Linksys Wireless Router :: WRT300N For Connecting PS3 Through Wi-Fi
Aug 8, 2007Just got WRT300N for connecting my ps3 thru wi-fi. I got everything works but the signal that I got from my PS3 is around 50% only. I am using latest Linksys firmware. My ps3 is located around 25 feet away one floor down from my wireless router. But there is no major wall inbeween the connection. My WRT300N should be a cutting edge product for networking. How come I still got 50% signal strength? Besides moving the router or pS3 closed to each other.
Linksys Wireless Router :: Wrt300n Linked To Wrt150n?
Aug 6, 2011In my home I have a cable modem wired to a links wireless router a wrt 300n in my office (only hardwired used in there) and I do not get such good distance to my back bedrooms with my laptop. I have run a Ethernet cable dead center of the house for my sat receiver that is connected and wired to the 300wrt. Here is my question can I use the 150 like a hub or switch at the office connected to the cable modem and use the wrt300n router so that I get wireless on that side of the house. Or in reading here I see I can maybe use a bridge. I do have a older Linksys wrt150n sitting in a box.I have read until my eyes are almost bleeding and am not sure. How I can get a better signal on the other side of the house.
Linksys Wireless Router :: WRT300N - No Internet Connection Via Laptop
Apr 2, 2010Unable to connect to internet via laptop + desktop to wireless Linksys router. Model=WRT300N.
Connection worked fine on my laptop before, however, stopped working approx 3 days ago.In attempt to resolve connection issue, I de-install linksys software from my desktop, now I cannot execute setup due to the fact that I cannot connect to the internet.
Connection worked fine on my laptop before, however, stopped working approx 3 days ago.In attempt to resolve connection issue, I de-install linksys software from my desktop, now I cannot execute setup due to the fact that I cannot connect to the internet.
Linksys Wireless Router :: Way To Access Set Up Page For Secondary WRT300N
Aug 13, 2012Since the secondary router WRT300N uses the same default IP 192.168.1.1 as the primary installed router EA4500, any attempt to log onto the set up page results in diversion to the Cisco Connect Cloud for the primary router.
Is there a way to access the set up page for the secondary WRT300N, bypassing the main router intervention via the Cloud software?
Is there a way to access the set up page for the secondary WRT300N, bypassing the main router intervention via the Cloud software?
Linksys Wireless Router :: WRT300N Dropped Connection Completely
Jul 4, 2011I've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect. My main pc is hard wired directly to the router and works perfectly as always. 3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed. The firmware was upgraded a long time ago and there are no other upgrades available.
Linksys Wireless Router :: Unable To Connect To WRT300N Using Web Interface
Sep 16, 2011For reasons I will explain in a separate thread, following a firmware upgrade to version 2.00.21, I am no longer able to connect to my WRT300N using the web interface. The device seems to be working fine (but for the lack of the web config access.) I'm loathe to leave it 'inaccessible' and would like to use the Setup CD-ROM described in the manuals to connect directly to the device to see if I can fix the problem.
I have been through my 'filing system' (read 'junk room') to try to find the original device packaging, wherein I am sure I would find the original CD-ROM. Is there anywhere I can download an image of the original Linksys Setup CD-ROM for the WRT300N version 2.0 device?
I have been through my 'filing system' (read 'junk room') to try to find the original device packaging, wherein I am sure I would find the original CD-ROM. Is there anywhere I can download an image of the original Linksys Setup CD-ROM for the WRT300N version 2.0 device?
Linksys Wireless Router :: WRT300N Losing Over 50mbps Of Speed?
Jan 22, 2013So lately my internet has been painstakingly slow, Youtube videos dont load, Web Pages take FOREVER, its killing me. So I ran some speed tests This is wireless over my router. (WRT300N (Yes i know its old))
And this is direct connetion from my modem this really just makes me want to never use the internet again.
And this is direct connetion from my modem this really just makes me want to never use the internet again.
Linksys Wireless Router :: WRT300N Way To Reinstall Connection And Put Password
Jan 2, 2013Due to problems with my wifi connection, I had to reset my router and modem. I have to reinstall my settings now, and therefore I need to write down a security number. That should be written on the back of my router (model WRT300N), a barcode with 8 numbers. I can't find that code. Where can I find it or is there another way to reinstall my connection and put a password on it? It's open access now.
Linksys Wireless Router :: WRT300N - Air Ave Access Point For Sprint
Mar 8, 2012I have a WRT300N wireless router that was working fine until I tried hooking up an Air ave Access Point for Sprint. Now the router doesn't work at all - even the hard wired connections don't work. I tried the usual - unplugging, plugging back in, disconnecting, reconnecting, hitting the reset button - nada.
Removing the Air ave Access Point doesn't matter - it still doesn't work when I put it back the way I had it before. The only way I can get a signal to my computer is to plug it directly into the modem, bypassing the router.
Removing the Air ave Access Point doesn't matter - it still doesn't work when I put it back the way I had it before. The only way I can get a signal to my computer is to plug it directly into the modem, bypassing the router.
Linksys Wireless Router :: WRT300N - Can't Play Online On Xbox Live
Jan 15, 2012Why I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
Linksys Wireless Router :: Cannot Connect Canon MP620 Printer To WRT300N V 1.1
Oct 10, 2009I cannot seem to figure out how to connect my Canon MP620 Wireless printer to my wireless router. The router is a WRT300N v 1.1 with the latest firmware upgrade. I am using WPA for security. I can connect to the printer wirelessly through my neighbor's open system so it has something to do with security I suspect. I have enabled the AP feature and disabled it to see if that is an issue. That has not changed anything. I have looked at other posts with HP printer issues and access point posts but none of those solutions have worked. The Canon gives me an option to use the WPA, WPA2 and WEP?
Linksys Access Point :: Can WRT300N Wireless Router Be Used As LWAPP Device
Nov 28, 2011Can a Linksys WRT300N wireless router be used as an LWAPP AP device?
Linksys Wireless Router :: WRT300N - Slow Speed And Low Ping Test?
Aug 18, 2007I have installed a WRT300N on to a new machine and the connection speed reads as 1 Mbps (not 100 but 1 ). I did a ping test and the results are
Linksys Wireless Router :: WRT300N Not Providing Internet When DHCP Disabled
Apr 5, 2012Here is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
Linksys Wireless Router :: WRT300n Version 1.1 - Power Light Blinking
Aug 15, 2011If I conact from the modem to the pc I have internet so it must be the router. The power light is blinking along with all the port lights. Power light is blinking one time slow 2 fast. Have tried holding the reset button for 30 seconds and unpluging for 30 seconds. Can not go to the ip address it times out. New firmware is not avalible.
Linksys Wireless Router :: Connecting WRT300N To Uverse Gateway - Dynamic IP Address?
Feb 6, 2012I have a WRT300n router and want to connect to my Uverse Gateway. When I connect them & try to use the internet connection I get an error that says a connected router must be capable of using DYnamic IP addresses.
Linksys Wireless Router :: WRT300N Power Light Dim And All Other Ports Solid Green
Nov 20, 2011I have a WRT300N and the power light is dim and all 4 ports are solid green along with the internet light being solid green.. Nothing else is plugged in.. Just the power.. I have tried to hard reset and nothing happens.
Linksys Wireless Router :: WRT300N - Reconnecting To Modem While Retaining All Current Security And Settings
Feb 24, 2012Comcast service went down in our neighborhood and when it came back up my internet was down and all five LED lights on my Linksys router are solid green. Tech support tells me that I have to reset the unit to get it to function again.It's been a very long time since I set up the home network and while I'm pretty sure I can make my way through setting up from scratch (I'm assuming resetting goes back to factory settings) I was hoping there was a way to reconnect the router to the modem while retaining all the current security and settings.
Linksys Wireless Router :: Reset WRT300N To Default Settings To Setup Internet Connection
Mar 29, 2012I've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
Linksys Wireless Router :: WRT300N Wireless Routers Are Compatible With LWAPP Configuration?
Nov 28, 2011Whether the Linksys WRT300N wireless routers are compatible with LWAPP configuration?My school lab setup uses Cisco integrated services routers with NM-AIR-WLC6-K9 network modules as controllers in the LWAP network. The controller accepts configuration without error but does not pick up or seem to see the WRT300 AP routers, so cannot push out basic LWAP config info
Cisco Switching/Routing :: Ws-C3550-24-Emi Memory Upgradable?
Nov 3, 2011i have a Ws-C3550-24-Emi switch and i need to upgrade its flash memory to 32Mb. I couldn't find any documents in cisco website about the memory upgrade guideline. Possible to upgrade this switch to 32Mb? If so, what's the max of memory i can upgrade? and the part number for this type of memory?
How To Turn Off NAT On A Linksys WRT300N
Feb 7, 2011I have a WRT300N Linksys Router and I have not been very happy with it's performance. I know it's old now, but the final straw was when I started to need UPNP and the router keeps turning it off. I can only get it to work for an hour or so at a time by rebooting the router. Then after some time my device tells me UPNP is not working again. I saw some articles about this and tried several fixes, and I am beyond caring whether it works with UPNP anymore. I bought a NetGear N600 to replace it and so far it is working great. I had a linksys WRT54G years ago and it was a workhorse, never had any issues and it is still working today at a friend's house. I have had several Linksys routers since and have had nothing but bad luck. So I am giving Netgear a try.
Anyway... Now I have the Netgear router working I want to use the linksys to extend my wireless network. I ran a cable to the other side of my house where the wireless signal was not so good and plugged the cable into a LAN port on the WRT300N router. I then disabled the the firewall settings and DHCP, etc. I turned off UPNP (Not that I needed to, but I figured it would start working since I don't need it now and cause issues) I also turned off NAT. But I have an app that is telling me that I have 2 devices doing NAT on my network and the app doesn't like it.
how I can for SURE turn off NAT on the WRT300N router? I am getting ready to just go get another Netgear device and take the Linksys one out Office Space style.
Anyway... Now I have the Netgear router working I want to use the linksys to extend my wireless network. I ran a cable to the other side of my house where the wireless signal was not so good and plugged the cable into a LAN port on the WRT300N router. I then disabled the the firewall settings and DHCP, etc. I turned off UPNP (Not that I needed to, but I figured it would start working since I don't need it now and cause issues) I also turned off NAT. But I have an app that is telling me that I have 2 devices doing NAT on my network and the app doesn't like it.
how I can for SURE turn off NAT on the WRT300N router? I am getting ready to just go get another Netgear device and take the Linksys one out Office Space style.
Linksys WRT300N Just Stopped Working?
Jun 30, 2011My router has been working for close to 4 years now with minor problems, just stopped yesterday, All my PCs lost wifi access and then when I looked at my Linksys WRT300N only the 4 Ethernet port lights were on. Unplugged plugged it again, I connected one of the PCs to the one of the Ethernet port, the PC is reporting that there is nothing connected to the other side. It's been 4 years already, I do have a Linksys wireless G router even older than this which is till working. I guess its spoiled, I don't mind replacing it
Connecting Android Devices To Wifi With Linksys Wrt300n?
Aug 25, 2012My wifi router is linksys WRT300N v1.1 At first my wifi works great with this devices . iphone 4s , ipod touch 4 , hp pavilion dv6 , dell inspirion 1545 . But it don't works with android devices I had a bunch of them samsung galaxy s3 , galaxy nexus , amazon kindle and more ...The android devices connect to wifi but wifi doesn't work for them in browsers I can't open pages there's appears <webpage not available> , but I can use skype on android devices.
Linksys WRT300N - Desktop Won't Connect To Network / Refuses To Authenticate
May 21, 2012I just replaced my router (Linksys WRT300N) that decided to take a dirt nap. I hooked up my son's Netgear router that he used to use for gaming, and got every wireless device in the house going pretty quickly - every one, that is, except my desktop PC (Windows XP Pro SP2). It detects my home network, but when I enter the network key (passphrase), it chugs along for a minute or so and quits, refusing to authenticate, acquire the IP, and finish connecting. That wasn't a problem before with my previous router. The desktop has a D-Link AirPlus G DWL-G510 PCI Adapter card. What's the likelihood that my card went bad at the same time as my router? The card is 5-6 years old I think.
Linksys Wireless Router :: What Is The Best Firmware For BEFW11S4
Apr 10, 2013I want to know what is the best firmware for BEFW11S4.
Linksys Wireless Router :: Where To Get New Firmware For E4200
Apr 14, 2012There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?
![](/uploads/1/2/5/5/125564577/256190080.jpg)